Dalsa Spyder3 Bedienungsanleitung PDF herunterladen (Seite 18)

18 Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual

03-032-20123-01 Teledyne DALSA

5. Select ―Use the following IP address‖ and set the IP address to any address in this subnet other

than 192.168.5.100, which is used by the camera. In the example below, the address 192.168.5.50 is

used. Alternatively, select ―Obtain an IP address automatically‖ to use a dynamic address.

6. Set subnet to: 255.255.255.0 and click on ―OK.‖

Figure 9. IP Address

7. Click ―OK‖ to save settings

8. Click on ―Configure‖ button and select ―Advanced‖ tab

9. Enable ―Jumbo Frames‖ to greater than 9000 bytes. If your NIC does not support jumbo packets

the image transfer speed will be slower.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 103 104

Keine Kommentare

Dalsa Spyder3 Bedienungsanleitung Seite 18