Dalsa Spyder3 Bedienungsanleitung PDF herunterladen (Seite 24)

24 Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual

03-032-20123-01 Teledyne DALSA

Step 3. Establish Communication with the

Camera

Power on the camera

Turn on the camera’s power supply. You may have to wait up to 60 seconds while the camera warms up

and prepares itself for operation.

Connect to the camera

1. Start a new Sapera CamExpert application (or equivalent GigE Vision compliant interface) by double-

clicking the desktop icon created during the software installation.

2. CamExpert will search for installed Sapera devices. In the Devices list area on the left side, the

connected Spyder camera will be shown.

3. Select the Spyder camera device by clicking on the camera user-defined name. By default the camera is

identified by its serial number.

Check LED Status

If the camera is operating correctly at this point, the diagnostic LED will flash for 10 seconds and then

turn solid green.

Software Interface

All the camera features can be controlled through the CamExpert interface. For example, under the

Sensor Control menu in the camera window you can control the frame rate and exposure times.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 103 104

Keine Kommentare

Dalsa Spyder3 Bedienungsanleitung Seite 24